Hello
Sport Pilot CFI here with an interesting situation
I'm in Hattiesburg MS
The Student/Buyer is in Paris TN KPHT
His new plane (a Taylorcraft) in Peru Illinois KVYS
The student is a Commercial Helicopter pilot with over 1,000 hours, 99% of it in rotorcraft
I flew with him for 5 hours in my Aeronca and he is a fast learner, but will need several more hours before he is ready, also the insurance company is requiring 10 hours in make and model
He will need a CFI who can pick up the plane at KVYS and ferry it the 303 miles to KPHT, then give him at least 10 hours of Dual to get him ready to ride with a 2nd CFI for fixed wing LSA signoff
any recommendations?
Need a Taylorcraft CFI (or at lease a tailwheel CFI)
Moderator: drseti
- azsportpilot
- Posts: 72
- Joined: Wed Jun 10, 2015 12:27 pm
- Location: Hattiesburg, MS
- Contact:
Need a Taylorcraft CFI (or at lease a tailwheel CFI)
John Sarra CFI-S
1946 Aeronca Chief
-Mankind has a perfect record in aviation; we never left one up there!
1946 Aeronca Chief
-Mankind has a perfect record in aviation; we never left one up there!
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
Did he buy George's airplane? I am an experienced Taylorcraft CFI and mechanic. I am located in Southeastern Illinois, so I could at least get it closer to home for him. Going to his place to do the training would be tough for me, but I would be happy to do it here.
- azsportpilot
- Posts: 72
- Joined: Wed Jun 10, 2015 12:27 pm
- Location: Hattiesburg, MS
- Contact:
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
doing the training there prior to ferrying the plane to TN would work, buyer is retired and has an open schedule and can travel
not sure who owns the plane he bought but i understand its a show stopping beauty
not sure who owns the plane he bought but i understand its a show stopping beauty
John Sarra CFI-S
1946 Aeronca Chief
-Mankind has a perfect record in aviation; we never left one up there!
1946 Aeronca Chief
-Mankind has a perfect record in aviation; we never left one up there!
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
I did part of my CFI check ride in a Taylorcraft 27 years ago. I have about 1000 hours of Taylorcraft time, and probably 25-30 in the last 6 months. A good part of that recent time is instruction given. I manage the Olney-Noble Airport, you can look the number up and give me a call if you want.
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
I just noticed this thread, and as coincidence would have it, I may be interested in buying a 1946 Taylorcraft BC12D. Problem is, I don't have a license (to fly) and I don't know anything about this plane. It's located about 50 miles away, here in western Washington. Does anyone know of a CFI hereabouts that could advise me on the purchase, assist in bringing it home, and possibly provide the needed training? Or am I asking too much? Appropriate compensation is of course understood.
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
I doubt he would travel to WA, but in response to the OP, suffice it to say that if I were looking for T-Craft instruction, Tom would be my first choice (but only because Amelia Reid is deceased).
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
I know there are Taylorcraft people out that way. I suggest you ask here, http://vb.taylorcraft.org/ , or here https://www.facebook.com/groups/571231992887131/ . You will need to join either group.HAPPYDAN wrote:I just noticed this thread, and as coincidence would have it, I may be interested in buying a 1946 Taylorcraft BC12D. Problem is, I don't have a license (to fly) and I don't know anything about this plane. It's located about 50 miles away, here in western Washington. Does anyone know of a CFI hereabouts that could advise me on the purchase, assist in bringing it home, and possibly provide the needed training? Or am I asking too much? Appropriate compensation is of course understood.
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
For those who don't know, that is high praise right there.drseti wrote:I doubt he would travel to WA, but in response to the OP, suffice it to say that if I were looking for T-Craft instruction, Tom would be my first choice (but only because Amelia Reid is deceased).
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
Cool. This is not a small undertaking... but sounds like a fun project.HAPPYDAN wrote:I just noticed this thread, and as coincidence would have it, I may be interested in buying a 1946 Taylorcraft BC12D. Problem is, I don't have a license (to fly) and I don't know anything about this plane. It's located about 50 miles away, here in western Washington. Does anyone know of a CFI hereabouts that could advise me on the purchase, assist in bringing it home, and possibly provide the needed training? Or am I asking too much? Appropriate compensation is of course understood.
I'm a partner in an upstart flight school in the L.A. area, which started as a couple tailwheel-obsessed friends armed with an Aeronca Chief. We're still small (a Super Decathlon and a few nosewheel trainers round out the fleet now), but we're Sport Pilot friendly and LOVE vintage taildraggers, so please get in touch if you can't find anyone closer.
Good luck and happy flying!
Leanne
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
Thanks, Leanne. No, I sure haven't had any luck. There was a gentleman who ran a club here called the Gig Harbor Light Sport Club, he owned an Aeronca Chief and was a CFII with previous USAF experience. Well, unfortunately, he passed on just last year. Recently, I found a club on Vashon Island that has a J3 Cub that they're willing to train in. So I plan to check that out here soon. But I'll keep your kind offer in mind.
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
The J3 is a fun airplane to fly. I have lots of hours in one and got my seaplane rating in one.
Retired from flying.
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
The J3 is a fun airplane to fly. When I had mine I flew it about 125 hours in a year and a half. Though I will say in my opinion of the vintage 2 seat light airplanes I have flown the J3 was just about my least favorite. The J4 Cub Coupe is the least favorite, but I don't have much time in that one.TimTaylor wrote:The J3 is a fun airplane to fly. I have lots of hours in one and got my seaplane rating in one.
I have time in Champs, J3 and J4 Cubs, Luscombes, Cessna 140, and Taylorcrafts. They are all fun, but my favorite is the Taylorcraft.
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
I learned to fly and got my Private in a Tri-Champ. That was a fun plane too. It's not an LSA with the nose wheel.
Retired from flying.
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
Exactly which LSA requirement did the Tri-Champ not satisfy?TimTaylor wrote:It's not an LSA with the nose wheel.
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Re: Need a Taylorcraft CFI (or at lease a tailwheel CFI)
Too heavy for one. Max gross weight of 1500 pounds.drseti wrote:Exactly which LSA requirement did the Tri-Champ not satisfy?TimTaylor wrote:It's not an LSA with the nose wheel.
Retired from flying.