Carb line leaking fuel

H. Paul Shuch is a Light Sport Repairman with Maintenance ratings for airplanes, gliders, weight shift control, and powered parachutes, as well as an independent Rotax Maintenance Technician at the Heavy Maintenance level. He holds a PhD in Air Transportation Engineering from the University of California, and serves as Director of Maintenance for AvSport of Lock Haven.

Moderator: drseti

User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Carb line leaking fuel

Post by Warmi »

Recently noticed that I could smell fuel on takeoff ..

Testing it on the ground with the electric pump on we saw this ...
https://youtu.be/6lHAMTUFqXU

Is it a leaking carb or the fuel line ?
Last edited by Warmi on Sat Sep 22, 2018 8:29 pm, edited 1 time in total.
Flying Sting S4 ( N184WA ) out of Illinois
User avatar
drseti
Posts: 7234
Joined: Sat Nov 28, 2009 6:42 pm
Location: Lock Haven PA
Contact:

Re: Carb line leaking fuel

Post by drseti »

I tried to check the video, and YouTube said removed by the user.
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Carb line leaking fuel

Post by Warmi »

Sorry about that . I fixed it and recreated the link..
Flying Sting S4 ( N184WA ) out of Illinois
User avatar
drseti
Posts: 7234
Joined: Sat Nov 28, 2009 6:42 pm
Location: Lock Haven PA
Contact:

Re: Carb line leaking fuel

Post by drseti »

It looks like leakage at the banjo bolt attachment to the carb. Could be the hose, the fitting, or under-torquing of the hardware. If the hose is over 5 years old (regardless of flight hours) Rotax calls for replacing it, along with all other engine rubber. If it's less than 5, the hose is probably OK unless the fitting has been removed and replaced (that can damage the rubber). But have a mechanic check the torque of that banjo bolt. In any case, it's unlikely to be the carb itself. When they leak, it's typically around the float bowl gasket, not at the hose fitting. And do NOT fly the plane or even start the engine until this has been resolved!
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Carb line leaking fuel

Post by Warmi »

I had 5 year rubber replacement done about 10 months ago so probably some kind of delayed side effect of that ... I will ask the guy who did the 5 year come over to the hangar to check it out on Monday.

Thanks
Flying Sting S4 ( N184WA ) out of Illinois
User avatar
ShawnM
Posts: 813
Joined: Sat Nov 11, 2017 9:59 pm
Location: Clearwater, FL / KZPH

Re: Carb line leaking fuel

Post by ShawnM »

Could be the ear clamp or hose clamp that was used as well. Since we can’t see under the fire sleeve it’ll be hard to guess. Seems like it’s leaking from a weak clamp and filling the fire sleeve.

Could also be a lose banjo bolt as Paul stated and leaking into the fire sleeve.

Do you have the new silicone hoses or did you use a standard rubber hose? If rubber I hope whoever did your hose change used the ear clamps or a smooth band screw clamp. Never use a standard hose clamp with the serrated band. Those clamps are the worst for aviation and should never be used as they cause leaks by themselves. Only ear clamps or smooth band clamps.

Please report back as to what you find on Monday. And as Paul said, don’t start it.
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Carb line leaking fuel

Post by Warmi »

Thanks for your input guys.

The 5 year job was done at this place http://www.theultralightplace.com
I am confident it was done acoording to the best practices , Jim Leon has been working with a Rotax engines since late 90s and is a go-to guy for Rotax service around Chicago area.

The funny thing is that just last week I did my first carb balancing and at first I thought maybe I messed up something with the carbs and it was overflowing or something ... but there is nothing really to mess up there and after the balancing the engine ran and still runs very smooth and the only sign was the fuel smell - will see ...
Flying Sting S4 ( N184WA ) out of Illinois
roger lee
Posts: 817
Joined: Tue Dec 08, 2009 11:47 am
Location: Tucson, Az. Ryan Airfield (KRYN)

Re: Carb line leaking fuel

Post by roger lee »

It does look like it's coming from the Banjo bolt area. There are three crush washers for that fitting. Many either drop one or put two on top of each other. I would take the Banjo bolt out and check the crush washers. It could also be that it just needs tightening. If these are the cause then the clamp that holds the hose on would be suspect.
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)
3Dreaming
Posts: 3128
Joined: Sun Jan 10, 2010 6:13 pm
Location: noble, IL USA

Re: Carb line leaking fuel

Post by 3Dreaming »

So what did you find?
User avatar
MrMorden
Posts: 2184
Joined: Fri Aug 17, 2012 7:28 am
Location: Athens, GA

Re: Carb line leaking fuel

Post by MrMorden »

Squeezing the hose causes a large leak, I'm guessing it's the hose, either from a too-loose clamp, the hose not fully seated on the banjo fitting, or a hose integrity issue (hole/split/tear). It's also possible the clamp is too far down on the hose and not clamping around the fitting.

That's scary, it's a quite a bit of fuel leaking. Make sure you check both sides very carefully, and I'd take a look at every other hose I could put my eyes on as well.
Andy Walker
Athens, GA
Sport Pilot ASEL, LSRI
2007 Flight Design CTSW E-LSA
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Carb line leaking fuel

Post by Warmi »

The mechanic was unable to come on Monday but after looking at it more closely ( pushed back the fire sleeve etc) ,looks like the leak originates at the banjo bolt area - I blocked off the hose and I was still getting a myst like distribution coming directly from the banjo bolt area - I ordered a set of crush washers and will open it up and try to diagnose it further later this weeks.
Flying Sting S4 ( N184WA ) out of Illinois
3Dreaming
Posts: 3128
Joined: Sun Jan 10, 2010 6:13 pm
Location: noble, IL USA

Re: Carb line leaking fuel

Post by 3Dreaming »

The gaskets are a 950-141, and the bolt torque is 90 inch pounds.
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Carb line leaking fuel

Post by Warmi »

3Dreaming wrote:The gaskets are a 950-141, and the bolt torque is 90 inch pounds.
Thanks do you know which clamp would be suitable for the carb fuel hose ? I see like dozen clamp sizes at the Leading Edge store :D

https://www.leadingedgeairfoils.com/cat ... Fuel+clamp
Flying Sting S4 ( N184WA ) out of Illinois
User avatar
drseti
Posts: 7234
Joined: Sat Nov 28, 2009 6:42 pm
Location: Lock Haven PA
Contact:

Re: Carb line leaking fuel

Post by drseti »

Warmi wrote:do you know which clamp would be suitable for the carb fuel hose ?
I've always been partial to the Oetiker clamps. Sometimes called "stainless steel ear clamps":

https://www.leadingedgeairfoils.com/sta ... 37-64.html
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Carb line leaking fuel

Post by Warmi »

Got it. Thanks
Flying Sting S4 ( N184WA ) out of Illinois
Post Reply