Page 1 of 1

Marc-Ingegno brake parts....

Posted: Wed Oct 09, 2019 3:59 pm
by proemer
I had to order some brake pads from Italy. Cost about $150 for 4 pads for the Magnesium calipers as used on the Sky Arrow.

Email: [email protected]

Pete

Re: Marc-Ingegno brake parts....

Posted: Wed Oct 09, 2019 5:18 pm
by drseti
Can you let me know where you ordered them, Pete? I'm maintaining a Sky Arrow, and want to keep a spare set of brake pads on hand.

Re: Marc-Ingegno brake parts....

Posted: Wed Oct 09, 2019 5:22 pm
by drseti
Never mind. I extracted their domain from the email address, and found their website.

Re: Marc-Ingegno brake parts....

Posted: Wed Oct 09, 2019 6:31 pm
by FastEddieB
Thanks for that. Less than I thought I had been quoted elsewhere.

At 600 hrs I’m still on my original pads. Plus I have another set with at least 50% life, given to me by a fellow who had converted to Matcos on a Flight Design CT.

I also bought some linings almost exactly the right size and shape and have toyed with the idea drilling holes and riveting them on when the time is right. As an EXPERIMENT of course! But at that price it might not be worth the hassle to mess with.

Re: Marc-Ingegno brake parts....

Posted: Thu Oct 10, 2019 8:39 am
by proemer
Price with shipping was: EUR 134,95. Took only about 5 days to arrive. Communication was a little slow and the payment thing was in Italian...
was simple enough to figure out.

Pete

Re: Marc-Ingegno brake parts....

Posted: Fri Oct 11, 2019 6:39 am
by rcpilot
Hmm. My Czech built Zenith 601 had Marc Ingegno brakes. I elected to just have them replaced with Matcos. A pricey option especially since apparently the landing gear design has changed since the kits were built in the Czech Republic. My mechanic had to have some parts made to get the Matco's to fit. It use to always be a challenge to keep the plane still while doing the run-up on the Rotax 912 but the new brakes work much better.